 |
| Quantity: | |
|---|---|
LJ
Butt welding flanges have a flat, circular-shaped face with a beveled edge that is meant to be aligned and welded to the pipe or fitting. The weld joint between the flange and the pipe creates a tight and secure seal, ensuring that there are no leakages.
These flanges are commonly used in high-pressure and high-temperature piping systems, such as those found in the oil and gas industry, chemical plants, and power generation facilities. They are available in various materials, including carbon steel, stainless steel, and alloy steel, to suit different application requirements.
304L stainless steel is also known as ultra-low-carbon stainless steel. It is a versatile stainless steel material. It is widely used to make equipment and machines that require good comprehensive performance (corrosion resistance and molding).
Chemical Composition(%)
| C | Si | Mn | Cr | Ni | S | P |
| ≤0.03 | ≤1.0 | ≤2.0 | 18.0~20.0 | 9.0~12.0 | ≤0.03 | ≤0.045 |
Mechanical Property
| Yield Strength(N/mm2) | Tensile Strength | Elongation | Hardness |
| ≥205 | ≥520 | ≥40 | ≤187 |
Butt welding flanges have a flat, circular-shaped face with a beveled edge that is meant to be aligned and welded to the pipe or fitting. The weld joint between the flange and the pipe creates a tight and secure seal, ensuring that there are no leakages.
These flanges are commonly used in high-pressure and high-temperature piping systems, such as those found in the oil and gas industry, chemical plants, and power generation facilities. They are available in various materials, including carbon steel, stainless steel, and alloy steel, to suit different application requirements.
304L stainless steel is also known as ultra-low-carbon stainless steel. It is a versatile stainless steel material. It is widely used to make equipment and machines that require good comprehensive performance (corrosion resistance and molding).
Chemical Composition(%)
| C | Si | Mn | Cr | Ni | S | P |
| ≤0.03 | ≤1.0 | ≤2.0 | 18.0~20.0 | 9.0~12.0 | ≤0.03 | ≤0.045 |
Mechanical Property
| Yield Strength(N/mm2) | Tensile Strength | Elongation | Hardness |
| ≥205 | ≥520 | ≥40 | ≤187 |
